Skz145b Touch Screen Digital Melt Flow Indexer for Melt Blown Mfi Mfr

Product Description

SKZ145B touch screen digital melt flow indexer for melt blown plastic mfi mfr melt flow index meter meter machine device 
 

Melt flow Indexer is used to characterize the flow performance of thermoplastic polymer in viscous state, used to measure the melt flow rate (MFR) and melt volume flow rate (MVR) of thermoplastic resin, suitable for melting Higher temperature polycarbonate, nylon, fluoroplastics, and other engineering plastics, as well as polyethylene, polystyrene, polypropylene, ABS resin, polyoxymethylene resin and other plastics with lower melting temperature; at the same time suitable for faster flow rate MVR determination of polypropylene PP melt blown materials.

Standards:
ISO 1133-1:2011,ISO 1133-2:2011,GBT 3682-2018, GBT 30923-2014,
ASTM D1238-2013,ASTM D3364-1999(2011), JJG878-1994,JB/T5456-2016,
DIN53735, UNI-5640

Feature:
1. The main unit is assembled by sheet metal split, the control system and the heating furnace are separated, which better protects the control system from high temperature and affects the life of components. It is convenient to disassemble and disassemble, spray plastic treatment, neat and beautiful.
2. The barrel and piston rod are made of alloy materials with high temperature resistance and low expansion coefficient. Through surface heat treatment, they are not deformed at high temperature and have high hardness. It is not easy to wear under long-term use to ensure data accuracy.
3. A rotary encoder is used as the displacement measurement device. The lever principle is used to ensure that the front and rear balances have no additional devices such as springs. Therefore, measurement errors are effectively prevented when measuring displacement.
4. The cutting device is controlled by a micro motor, and the cutting time can be set or manually cut. The operation is simple. The cutting knife is made of high-strength spring steel to ensure that the sample will not be deformed or damaged under long-term work.
5. The 7-inch touch screen interface is rich in information, simple and convenient, and can quickly and accurately grasp the current test status.
6. The CPU adopts STM32 chip, 32-bit operation, and the operation speed is greatly improved (the chip is designed for the British arm company). Users can choose whether to save or print the current test data according to their own needs.
7. This device can save 5 sets of test data, without limiting the type of test, permanent storage, no loss of power.
8. The control board reserves a variety of signal interfaces to facilitate user upgrades.
9. The touch screen displays the current status of the device, and there will be different prompt sounds during the test to remind the user of the current status of the device.
10. Humanized design: the backlight adjustment and touch sound in the system settings can meet the user's operating habits.
11. User Help: Lists common fault phenomena and solutions for users.
12. Chinese and English test version.
13. Each test can be printed in both Chinese and English reports.
14. When the user closes the temperature control system, the system will prompt the user whether to confirm the completion of the cleaning, which greatly reduces the damage of the equipment caused by the user forgetting to clean.
15. It is suitable for the testing of melt flow rate (MVR) of high flow materials such as polypropylene melt blown materials.

Main technical parameter:

Measuring range	0. 01-600.00 g/10min (MFR)
	0.01-600.00 cm3/10min (MVR)
	500cm^3 /10min -2800cm^3 /10min (MVR) for melt blown
Temperature range	0-400ºC
Temperature accuracy	±0.2ºC
Temperature gradient	≤0.5ºC
Temperature resolution	0.01ºC
Measuring method	MFR MVR
Material canister	inside diameter : 9.55±0.025mm
	inside length :160mm
Piston	diameter : 9.457±0.01mm
	Weight: 106g
Mould	inside diameter: 2.095mm
	length: 8±0.025mm
Barrel temperature recovery time after feeding	≤4min
Stroke	Measure range: 0-30mm
	Accuracy: ±0.02mm
Poise	325g-21600g discontinuous, combined load can meet standard requirements
Base weight	(piston weight + base poise weight) 0.325Kg
Weights	0.875Kg, 1.290Kg, 1.835Kg, 3.475Kg, 4.675Kg, 5.000Kg, 5.000Kg one each (may freewill combination )
Poise can be	0.325Kg,1.0Kg,1.2Kg,2.16Kg,3.8Kg,5.0Kg,10.0Kg,21.6Kg
Poise Accuracy	≤±0.5%
Cleaning accessories	clean material pole
Calibration accessories	water level bubble
Supply Power	220V±10% 50Hz or 60HZ
Heat up power	550W
Dimension	580×480×530
Weight	85kg (net)/135kg (gross)

   
Packing list:

Item	Quantity
Host	1PC
Base weight	1PC
Weight	1unit (six sort's seven pieces)
Piston	1PC
Mould	1PC
Oriented sheath	1PC
Water level bubble	1PC
Hopper	1PC
Clean material pole	1PC
Mould bore	1PC
Material check	1PC

Packaging & Shipping

 

Customer show

 

 

 

FAQ

 

Company Information