Skz1017A Packaging Plastic Film Astmd1003 Jisk7105 Gradient Heat Seal Meter Tester Machine Instrument Equipment Device

• After-sales Service: 24 Hours Online Customer Service
• Warranty: 1 Year
• Type: One Point Heat-Seal Tester
• Display: Digital
• Weight: 35kg
• Power Source: AC220V
• Model NO.: SKZ1017A
• Compressed Air: 6kg/Cm2
• Seal Area: 180mm*10mm Smooth (Lower Seal Rod with
• Heat Sealing Temperature: Room Temperature-300 Degree
• Heat Sealing Time: 0.01s ~ 999.9h
• Heat Sealing Pressure: 0 ~ 0.8MPa
• Power: AC220V 50Hz or 60Hz
• Dimension: 530mm*300mm*470mm
• Transport Package: Wooden Packing
• Specification: 530mm*300mm*470mm
• Trademark: SKZ
• Origin: China
• HS Code: 90248000
• Production Capacity: 2000PCS/Year

Product Description

SKZ1017A packaging plastic film ASTMD1003 JISK7105 gradient heat seal meter tester machine instrument equipment device

Be measured heat sealing temperature range of sealing compound, heat sealing strength, hot package of speed, heat sealing pressure, used for plastic, flexible packaging composite membrane, coated paper, foil.  

1. Structure:
It contains air drive system, sealing devices, temperature-conditioning systems, time-conditioning systems

2. Air-driven system:  
Including pressure gauges, guide rods, cylinder, pneumatic valve, pressure regulator handles, so on. pull out the pressure regulator handle, turn right to increase the sealing pressure, a left turn can reduce the sealing pressure, after finishing the pressure setting and turn the handle to the host side to lockup the air pressure.

3. Sealing device
Composed by the upper and lower sealing bars, upper rods connect with cylinder, and on the upper sealing bar has insulation panels, to prevent transmission of heat to the cylinder. Aluminum rod for sealing, heat sealing the central rod for the heater, above the heat sealing of the lower rod has silica gel plate, can ease the pressure at the time of the impact of heat sealing, back of heat sealing rods are equipped with body temperature.

4. Temperature Control System
upper temperature controller control the upper sealing bars, lower control the lower sealing bar, by adjusting the dial on the button, can set temperature easily.

5. Time-conditioning systems
Sealing time can be set up by adjusting the dial button with range 0.01s ~ 999.9h, in manual mode, press the foot pedal, sealing rods were pressed down; in automatic mode, the upper and lower sealing rods press time from the calculagraph control automatically, once automatic reset. Timer units typically 0.1 seconds, on the panel of the timer have the time adjustment button, sealing time adjustment can be done.

Technical parameters:  

Compressed air	6kg/cm ²
Seal area	180mm × 10mm smooth (lower seal rod with silicon pad)
Heat sealing temperature	room temperature ~ 300 ° C (accuracy ± 1 ° C)
Heat sealing time	0.01s ~ 999.9h
Heat sealing pressure	0 ~ 0.8Mpa
power	AC220V 50HZ or 60HZ
Dimension	530mm × 300mm × 470mm
Weight	35kg

Packaging & Shipping

 

Customer show

 

 

FAQ

 

Company Information